Tips For Replacing a Window Handle
It is simple to change your window handle in the comfort of your home. Follow these guidelines to ensure an elegant and smooth finish.
Start by removing the screw covers to expose the screws within the uPVC window handle. Measure the spindle to make sure you're getting the right size replacement.
1. Determine the Spindle Length
It is essential to ensure the correct size of the spindle when replacing the window handle. This is because it will affect how tight or loose the handle is and whether it's able to lock properly inside the window frame. The spindle is the steel shaft that connects to the handle and to the lock in the frame of the window. The spindle can be either a standard industry 8mm cross-section or the older 9mm versions. The current industry standard is 8mm, but this wasn't always the case so when purchasing a new handle, it's essential to check the measurements.
The most efficient method to determine the length of the spindle is take off the handle you have already installed and this can be done by turning it to the open position, then unscrewing the two screws (which may be hidden behind plastic caps that require removal) that retain the handle. Once the handle has been removed, take a measurement from the base to the end. This will provide you with the measurements required to buy a replacement.
There are plenty of options when it comes to choosing the right window handle from sleek chrome that can fit in with a modern home, to traditional burnished brass that looks wonderful in restored Georgian rooms or even the more traditional Tudor cottages with curved monkey tail latches! The possibilities are endless, but the most important thing to do is select a style that is suitable for your home.
Espag handles are usually fitted to uPVC windows and are always identical in size with 43mm centers (2 fixings). Cockspur handles are available in a variety of sizes, ranging from 58mm up to 62mm. Window handles from Cadenza come in distinct dimensions due to their bent blade that is used to operate an interlocking mechanism that is multi-point inside the window.
When selecting a window handle it is important to consider the hand you use to open your door. Inline espag window handles are not handed and can be utilized on right or left handed windows. Cranked window handles can only be used with windows that are open in one direction.
2. Remove the Handle
A window handle that is sagging can be frustrating, regardless of whether the handle is damaged or worn out. But the good part is that replacing the uPVC window handle is a simple task you can complete yourself. You will require only the most basic hand tools as well as some time to complete this process.
The first step is to have to open the window and make sure that it is in an unlocked position. Next, you need to remove the screw caps which hold the handle in place. Once the screw caps have been removed, you will be able to remove the handle.
The handle is attached to a spindle within the window frame. It is held in place by a pin or a screw dependent on the kind of handle. The most commonly used handles are the inline Espagnolette and cockspur handles. Both kinds of handles are available on casement windows, including aluminium ones. The handles can be locked with a key to stop unauthorised access from outside. Or you can lock the handles by turning them clockwise.
To remove the handle you will require a flat-bladed screwdriver. After the clip has been released, the handle should slide off the spindle. Once the handle that was previously used is removed, you'll have to take a measurement of the length of the spindle to ensure that the new handle will fit.
Once you have the correct size, you are able to screw the new handle in place. You must ensure that the new handle is firmly attached and that it turns in the correct way (clockwise for open, or counterclockwise for closed). It is also important to check that it is not installed upside down.
In the end, you must replace the screw cover caps. After repairmywindowsanddoors.co.uk have completed this step, you are able to test your handle to make sure that it's working properly. You can also test the locking system by shifting the handle from the unlocked position to the locked and back.
3. Remove the Screws
A uPVC handle is a crucial element of any home and is the first item to show signs of wear or damage. This could be due natural factors, regular use or even intentional damage by criminals looking to gain access to your home. A simple replacement can solve the problem and prevent it from repeating itself.
UPVC handles can also be difficult to remove if the locking mechanisms are not functioning correctly. In most cases, the issue can be resolved by replacing the multipoint lock instead of the entire handle, and it's worthwhile to check this out because it could save you money.
Once you've removed your old handle, you'll need to take off the screws that were fixing it to the base. The screws are typically located on the inside of the handle's base. You may need to use a screwdriver to accomplish this and it's important that you don't over tighten, as this could cause the handle to loosen.
You'll then have to locate the fixing pins or screws that hold the new handle in the correct position. They are typically located on the inside of the handle base. You'll need an instrument to remove them. After they've been removed, you'll need to replace the caps on screws if you wish to do so and test the new handle to ensure it's working properly.
Install the handle by aligning the spindle with the cutout in the window mechanism. Then, screw it in. Make sure the handle is in the open position and that any screws are securely secured prior to replacing the screws' covers in the event that you want to do this. Then you can enjoy your newly installed window handle. This should allow you to avoid costly door and window replacements in the near future. Contact us if need more information about this or any other aspect of your uPVC window.
4. Install the new handle
If you're replacing a damaged handle or simply updating it, the process is surprisingly simple and can be completed in a matter of a few steps. The key is to identify the kind of handle, take measurements of its spindle and identify the tools you'll require to complete the task. Safety is always the primary priority when working with tools and windows. It is also essential to be patient and follow the steps to ensure you have a working handle that is safe to use.
The first step is to find the screws that hold your current window handle and remove them, while keeping a safe hold on the handle itself to stop it from falling suddenly and result in injury. Once the screws are removed, you can place them in a safe place to be replaced in the future.
After removing the old handle, you are now able to install your new one. It is important that the handle is fitted perfectly to ensure it is functional and secures the window in position. Then move the square metal bar on the handle into the hole in the window mechanism.
The last step is to replace the caps on the screws and test the handle to make sure it works. If you're not happy with the result or if your window does not open and close properly contact our experts for assistance.
The majority of UK homes are equipped with uPVC Windows. Therefore, a large number of windows will need to be changed at some point because of wear and tear or breakage. Anyone with some DIY knowledge can complete the task. It is important that the handle you use matches the dimensions and style of the window. Contact our team if you are unsure of the type of handle you require. They'll be able to assist you with all of the choices.